Page 2
Step 2 Order #XXXXX - General Information 866.652.2100 Using Your Setup Instructions The Visionary Designs Setup Instructions are created specifically for your Detail A configuration. They are laid out sequentially, including an exploded view of the entire display, and then a logical series of detailed steps to assemble the main structure and components.
Page 4
Step 2 Order #XXXXX - Header Assembly 866.652.2100 Part Number Description 90” Lower Horizontal Extrusion 8.75“ Tapered cut Vertical Extrusion 14” Tapered cut Vertical Extrusion 93” Curved Horizontal Extrusion Steps: 1) Attach header pieces together as shown. Lock 2) Apply graphic to front of assembled header. 3) Attach assembled header frame to ceiling by locking to connectors where indicated.
Page 5
Step 3 Order #XXXXX - Attachments 866.652.2100 Steps: 1) Connect Shelf Supports to Horizontal Backwall Extrusions (see Detail). A10 Clamp Detail 2) Place Backwall Counters in position. Monitor Mount Attachment Tighten set screw to 3) Attach Standoff Barrells to top of Backwall Counter. Attach wall plate to secure A10 to extrusion.
Page 7
Step 5 Order #XXXXX - MOD-1234 Workstation Assembly 866.652.2100 Item Qty. Description Steps: 41.5”h Vertical Extrusion 1) Attach lower horiozntal extrusions and 6] between vertical extrusions 41.5”h Vertical Extrusion 2) Place inserts and attach door where indicated, then attach upper horizontals as shown. 70”h Vertical Extrusion 3) Velcro shelf supports to inside of assembled base, then set internal shelf atop supports.
Need help?
Do you have a question about the visionary DESIGNS VK-2916 and is the answer not in the manual?
Questions and answers