Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Improper replacement of the battery with an incorrect type may defeat a safeguard (for
●
example, in the case of some lithium battery types).
DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,
●
which may result in an explosion.
DO NOT leave the battery in an extremely high temperature surrounding environment, which
●
may result in an explosion or the leakage of flammable liquid or gas.
DO NOT subject the battery to extremely low air pressure, which may result in an explosion or
●
the leakage of flammable liquid or gas.
Installation
Never place the equipment in an unstable location. The equipment may fall, causing serious
●
personal injury or death.
This equipment is for use only with corresponding brackets. Use with other (carts, stands, or
●
carriers) may result in instability causing injury.
System Security
You acknowledge that the nature of Internet provides for inherent security risks, and our
●
company shall not take any responsibilities for abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker attack, however, our company will provide timely
technical support if required.
Please enforce the protection for the personal information and the data security as the device
●
may be confronted with the network security problems when it is connected to the Internet.
Please contact us when the device might exist network security risks.
Please understand that you have the responsibility to configure all the passwords and other
●
security settings about the device, and keep your user name and password.
Maintenance
If the product does not work properly, please contact your dealer or the nearest service center.
●
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
●
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●
If the equipment is used in a manner not specified by the manufacturer, the protection provided
●
by the device may be impaired.
To reduce the risk of fire, replace only with the same type and rating of fuse.
●
The serial port of the equipment is used for debugging only.
●
Disconnect the power source during servicing.
●
v