Analog way pls300 Programmer's Manual
  1. Manuals
  2. Brands
  3. Analog way Manuals
  4. Switch
  5. PLS300
  6. Programmer's manual

Analog way pls300 Programmer's Manual

Hide thumbs Also See for pls300:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Programmer's Guide
For PLS300
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the pls300 and is the answer not in the manual?

Questions and answers

Related Manuals for Analog way pls300

Summary of Contents for Analog way pls300

  • Page 1 Programmer’s Guide For PLS300...
  • Page 2 A1: Introduction If you need to use your own Software Control program from a PC or WORKSTATION with an RS-232 or LAN port, the device allows communication through an ASCII code protocol. The device treats any character that it receives on the RS-232 or LAN as a possible command but only accepts legal commands. There is no starting/ending code needed in a command string.
  • Page 3 A [write command] is made of indexes followed by the numerical value followed by the command characters. Write command = [[index,] ...] + Value + Character (s) code (s) For example: “1,2,0IN” or “4YB” A [read command] is made of indexes followed immediately by the command characters. (no numerical value) Read command = [[index,] ...] Character (s) code (s) For example: “1,2,IN”...
  • Page 4 A4: Error codes Answer: E10<CR><LF> which mean invalid command Answer: E11<CR><LF> which mean index value error (index value out of range) Answer: E12<CR><LF> which mean index number error (too or few indexes) Some commands are only available as [Read command], they are status and are colored in blue as this line. Some commands are colored in yellow as this line to indicate they were added or modified in this version.
  • Page 5 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value Request the retrieval of all the DIESE Rd/Wr 0 variables SYSTEM 0= Initialization in progress READY Ready Device Flag 1 = Ready DEV MMS device type 78 = PLS-300 UPDATER Device reboot for update...
  • Page 6 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = No input 1 = Input1 2 = Input2 3 = Input3 4 = Input4 Back-up input when an input loose FRAME_ALERT Rd/Wr 0 5 = Input5 its signal 6 = Input6...
  • Page 7 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Number of programmables components 1 = Main micro- controler 2 = Front panel Checksum/version of the micro-controler VERK Rd/Wr 0 65535 0 programmable components 3 = FPGA Caecina...
  • Page 8 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = None 1 = Invalid 2 = Unknown 3 = SDTV NTSC 4 = SDTV PAL 5 = SDTV SECAM 6 = SDTV BW 7 = SDTV 480i 8 = SDTV 576i 9 = EDTV 480p...
  • Page 9 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = SDTV Composite 1 = SDTV Y/C 2 = SDTV/EDTV/HDTV RGBS TTL/Analog 3 = SDTV/EDTV/HDTV RGB 4 = SDTV/EDTV/HDTV YUV 5 = Computer SOG 6 = Computer H&V or Composite (TTL/Analog) 0 = Input1...
  • Page 10 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 IN_USED Input is enabled Rd/Wr 0 5 = Input6 8 = Input9 9 = Input10 10 = Input11...
  • Page 11 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Less than 10 meter cable length 10 = Input11 IN_HDCP_CABLE_LEN Lenght of an DVI input cable Rd/Wr 0 1 = 5 to 20 meters cable length 11 = Input12 2 = More than 15 meters cable length...
  • Page 12 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 Keying Tolerance (for chroma and 4 = Input5 IN_KEYING_TOLER KH KH Rd/Wr 0 luma key) 5 = Input6 8 = Input9...
  • Page 13 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 IN_KEYING_INVERT Invert keying area Rd/Wr 0 5 = Input6 8 = Input9 9 = Input10 10 = Input11...
  • Page 14 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 SIG_FREQ_FIELD Input frame frequency 65535 0 Unit = 1/100Hz 5 = Input6 8 = Input9 9 = Input10...

  • Page 15: Input3

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = None 1 = Invalid 2 = Unknown 3 = SDTV NTSC 4 = SDTV PAL 5 = SDTV SECAM 6 = SDTV BW 7 = SDTV 480i 8 = SDTV 576i 9 = EDTV 480p...

  • Page 16: Input4

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = None 1 = Invalid 2 = Unknown 3 = SDTV NTSC 4 = SDTV PAL 5 = SDTV SECAM 6 = SDTV BW 7 = SDTV 480i 8 = SDTV 576i 9 = EDTV 480p...

  • Page 17: Table Of Contents

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Bits 0 to 7 0 = Input1 Slice 1 = Input2 1 = Bits 8 to 15 2 = Input3 Slice 3 = Input4 2 = Bits 16 to 23 Bit field of the fomats compatible 4 = Input5...

  • Page 18: Input6

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 SIG_WIDTH Input displayed pixel count 65535 0 Unit = pixels 5 = Input6 8 = Input9 9 = Input10...

  • Page 19: Setting

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 SET_HPOS SH SH Input horizontal position Rd/Wr 0 2048 1024 1024 = neutral 5 = Input6...
  • Page 20 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 SET_BRIGHTNESS Input brightness Rd/Wr 0 128 = neutral 5 = Input6 8 = Input9 9 = Input10 10 = Input11...

  • Page 21: Input9

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 SET_HTOTAL ST ST Input total pixel per line Rd/Wr 0 65535 0 Unit = pixels.

  • Page 22: Input10

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 ADC G channel adjustment 4 = Input5 SET_USER_GAIN_G Rd/Wr 0 128 = neutral (advanced setting) 5 = Input6 8 = Input9...

  • Page 23: Input11

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 Cropping window horizontal Percent = 65535 = 100% : all 4 = Input5 SET_CROP_WIN_POS_H Rd/Wr 0 65535 32768...

  • Page 24: Input12

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 0 = 4/3 Fullscreen 1 = Input2 1 = 4/3 with 16/9 content + black 2 = Input3 stripes 3 = Input4 2 = 4/3 with 2.35 content + black 4 = Input5 SET_ASPECT_RATIO_IN...

  • Page 25: Setting

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 SET_RESET_SETTINGS Current input default settings Rd/Wr 0 5 = Input6 8 = Input9 9 = Input10 10 = Input11...
  • Page 26 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset 0 = No input Frame for output 1 = Next preset 1 = Input1 2 in matrix mode 2 = Previous...
  • Page 27 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 28 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 29 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 30 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 31 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 32 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 33 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 34 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 35 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...
  • Page 36 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset 0 = Left to right Frame for output 1 = Next preset 1 = Right to left 2 in matrix mode 2 = Previous...
  • Page 37 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 0 = Cut 2 = Background...
  • Page 38 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background 0 = Current preset Frame for output 1 = Next preset 2 in matrix mode 2 = Previous 2 = Background preset...

  • Page 39: Setting

    Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Background Frame for output 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output Previewed layed (layer that is PREVIEWED_LAYER NC NC Rd/Wr 0...
  • Page 40 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = PAL 1 = NTSC 2 = 480p 3 = 576p 4 = SMPTE296M 5 = SMPTE260M 6 = SMPTE274M 7 = SMPTE274M 8 = SMPTE274M 9 = 640 x 480 4/3 10 = 848 x 480 16/9...
  • Page 41 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Custom Field Rate 1 = 23,97 Hz 2 = 24 Hz 3 = 25 Hz 4 = 29,97 Hz 5 = 30 Hz 0 = Main output ORATE OR OR...
  • Page 42 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Black 1 = Navy blue 2 = Blue 3 = Green Blue 4 = Water Blue 5 = Turquoise blue 6 = Dark green 7 = Green 8 = Lime 9 = Light green...
  • Page 43 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = No pattern 1 = Vertical Grey Scale 2 = Horizontal Grey Scale 3 = Vertical Color Bar 0 = Main output OPATTERN OP OP Output test pattern Rd/Wr 0...
  • Page 44 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Analog input 1 as reference 1 = Analog input 2 as reference 2 = Analog input 3 as reference 3 = Analog input 4 as reference 4 = Analog input 5 as reference 0 = Main output 5 = Analog input 6 as reference...
  • Page 45 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Free 1 = Recalling picture 2 = Storing picture PSTATUS PE PE Picture management status 3 = Picture format not compliant with current output format 4 = Deleting a picture 5 = Flash access error Frames validity (bitfield : bit0 =...
  • Page 46 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = No Picture 1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 PCAPTURE_INDEX PX PX ID of the picture to capture...
  • Page 47 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 0 = Normal logo 6 = Logo 6 PSTATUS_STYLE Logo style...
  • Page 48 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = IP address high byte 1 = IP address 0 = Device mid high byte LANIP nw nw LAN devices addresses Rd/Wr 0 IP : 0 to 255 1 = Remote 2 = IP address...
  • Page 49 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Analog input 0 = EDID is ready 1 = Analog input EDID_REQUEST ES ES Request for an EDID Rd/Wr 0 1 = EDID saving 2 = EDID reading 3 = DVI-D input 1 4 = DVI-D input 2...
  • Page 50 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 0 = Main output AUDIO_MASTER_VOLUME AV AV Output Master volume Rd/Wr 0 0 = mute, 32 = -18dB , 255 = 0dB 1 = Preview output 0 = Main output 0 = mono...
  • Page 51 Read / Default Group Name CmdResp Description Values Index #1 Index #2 Write Value value value 10 = Channel 11 – SDI 1 11 = Channel 11 Information of audio channel – SDI 2 AUDIO_DESEMBEND_LOCKED 1 : Locked presence for SDI inputs 12 = Channel 11 –...

Table of Contents