JLG 1850SJ Operation & Safety Manual page 97

5.3.1 Diagnostic Trouble Code (DTC) Tray
This tray shows the total number of DTC's and the DTC Text. If there are multiple DTC's,
the operator can scroll through the DTC List to the end. When the tray is empty, this
means there are no active DTC's.
5.3.2 Console Tray
This tray represents the platform console information.
When the machine is in operation, and the footswitch is pressed, the console will show
available functions with a green arrow and unavailable functions with a gray arrow.
Note: The green and gray console arrows shown in the examples in this section may
be different depending upon machine setup and specific operating conditions.
5.3.3 Icons Tray
The Icons Tray shows engine RPM plus Creep and Super Creep modes.
The RPM level is represented in bars.
5.3.4 Machine Status Tray
The Machine Status Tray is used to display different images based on the machine
status. These include:
• Key Switch Ground Mode
• CAN Bus Lost
• Take Foot Out
• Put Foot In
• BCS Lamp On
• Wire Rope Service
• System/Platform Level DTCs
• Platform Overload DTCs
• Weight Mode Error
• Chassis Status
• In Transport and Out of Transport
• Axles Extended, Retracted, Transient
• Machine Tilted
• Envelope Status
• Unknown Machine Model
1850SJ 31222393
LCD Display Panel
97