JLG 1850SJ Operation & Safety Manual page 144

Accessories
7.16.3 Welding Accessories
• 12 ft welding leads with clamp and stinger (stored in the platform)
• Fire extinguisher
7.16.4 Safety Precautions
Do not overload platform.
De-rate the platform by 64 lb (29 kg) when welder is in the platform.
• Check for cracked welds and damage to welder supports.
• Check for proper and secure installation of welder and bracket.
• Ensure no personnel are beneath platform.
• Do not exit platform over rails or stand on rails.
• Use this option only on approved models.
• Keep lanyard attached at all times.
• Ensure correct polarity of leads.
• Wear proper welding apparel.
• Use correct rod size and current settings.
• Do not use electrical cords without ground.
• Do not use electrical tools in water.
• Do not weld to the platform.
• Do not ground through the platform.
• Do not use a high frequency arc starter with TIG welder.
7.16.5 Preparation and Inspection
• Connect ground clamp to metal being welded.
• Ensure there is a good ground connection and observe proper polarity.
144
WARNING
WARNING
31222393 1850SJ