Table of Contents
Advertisement
Watch Dog Enable/Disable
JWD enables the Watch Dog func-
tion. Watch Dog is a system moni-
tor that can reboot the system when
a software application is "hung up".
Pins 1-2 will cause WD to reset the
system if an application is hung up.
Pins 2-3 will generate a non-
maskable interrupt signal for the ap-
plication that is hung up. See the
table on the right for jumper settings.
Watch Dog can also be enabled via
BIOS.
Note: When enabled, the user needs
to write his own application software
in order to disable the Watch Dog
Timer.
AC'97 Audio Enable/Disable
AC'97 provides high quality onboard au-
dio. The X6DA8-G2 features 6-channel
sound for front L&R, rear L&R, center
and subwoofer speakers. This feature is
activated with the Advanced software on
the CD-ROM included with your
motherboard. The Line In, Line Out and
MIC jacks (see at right) may then be
used. Activate AC 97 with the "AC 97
Audio" setting in the Advanced Chipset
Features section of BIOS. To activate
the Onboard Audio, please enable the
Jumper JPC1. See the table on right for
pin definitions.
Chapter 5: Advanced Serverboard Setup
Jumper Settings (JWD)
Jumper
Position
Pins 1-2
Pins 2-3
Open
AC97 Enable/Disable
Jumper Settings (JPC1)
Jumper
Position
1-2
2-3
5-19
Watch Dog
Definition
WD to Reset
WD to NMI
Disabled
Definition
Enabled
Disabled
Blue: Line In (surround
sound L/R)
Green: Line Out
(front L/R)
Pink: MIC In (center/
subwoofer)
Advertisement
Table of Contents
