Table of Contents
Advertisement
Interrupt
Select the IRQ (interrupt request) for the parallel port. The options
are IRQ5 and IRQ7.
Mode
Specify the parallel port mode. The options are Output, Bi-directional,
ECP and EPP.
DMA Channel
Specify the DMA channel. The options are DMA1 and DMA3.
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller.
The options are Enabled (user defined), Disabled, Auto (BIOS controlled)
and OS Controlled.
Base I/O Address
Select the base I/O address for the Floppy port. The options are
Primary and Secondary.
7-15
Chapter 7: BIOS
Advertisement
Table of Contents
