Table of Contents
Advertisement
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM.
The options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus
master. The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master.A high-
prioity, high-throughout device may benefit from a greater Clock rate.
The options are Default, 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h,
and 00E0h.
select the option:"other". If a drive fails after the installation of a new
software , you might want to change this settiing and try again.
Different OS requires different Bus Master clock rate.
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The
options are DOS or Other (for Unix, Novellle NetWare and other operating
systems).
! ! ! ! ! Advanced Chipset Control
Access the submenu to make changes to the following settings.
Force Compliance Mode
If enabled, this feature sets the device specified to comply with the PCI-
Express Compliance 1.0 Mode.
Enabled.
For Unix, Novell and other Operating Systems, please
The options are: Disabled and
7-11
Chapter 7: BIOS
Advertisement
Table of Contents
