Pga Processor And Heatsink Installation - Supero SuperServer 7044A-82R User Manual

S S
UPER ERVER 7044A-82R Manual
5-2

PGA Processor and Heatsink Installation

When handling the processor package, avoid placing direct
pressure on the label area of the fan. Also, do not place the
! motherboard on a conductive surface, which can damage the
BIOS battery and prevent the system from booting up.
IMPORTANT: Always connect the power cord last and always remove it before
adding, removing or changing any hardware components. Make sure that you
install the processor into the CPU socket before you install the CPU heat sink.
CPU Installation
1. Lift the lever on the CPU socket:
Lift the lever completely as shown on
the picture on the right; otherwise, you
will damage the CPU socket when
power is applied. Install CPU1 first.
2. Insert the CPU in the socket,
making sure that pin 1 of the CPU
aligns with pin 1 of the socket (both
corners are marked with a triangle).
When using only one CPU, install it
into CPU socket #1. (Socket #2 is
automatically disabled if only one
CPU is used.)
3. Press the lever down until you
hear a *click*, which means the
CPU is securely installed in the
CPU socket.
5-2
Socket lever
Pin 1
Socket lever in the
locking Position