Table of Contents
Advertisement
Figure 6-3.
6-4
Drive Bay Installation
SCSI Drives
Five SCSI drives are housed in a mobile rack [CSE-M35(B)P]. The SCSI
drive IDs are preconfigured as 0 through 4 in order from right to left (or from
bottom to top if rackmounted).
Note: You must use standard 1" high, 80-pin SCA SCSI drives in the
SuperServer 7044A-82R.
Use extreme caution when working around the SCSI backplane.
Do not touch the backplane with any metal objects and make
!
sure no ribbon cables touch the backplane or obstruct the air-
flow.
Chapter 6: Advanced Chassis Setup
Removing the 12-cm Exhaust Fan
6-5
Advertisement
Table of Contents
