Table of Contents
Advertisement
S
S
UPER
ERVER 7044A-82R Manual
PCI-E Express Jitter Tolerance
This feature allows the user to set the PCI-E Jitter Tolerance Level.
The
options are: 4 to 12.
PCI-E Port A Device 2/PCI-E Port B Device 4
If enabled, the feature allows you to set the device selected to be
compliant with the PCI-Express Compliance 1.0 Mode.
The options are:
Disabled, Enabled and Auto.
Clock Spectrum Feature
If "Enabled", the BIOS will sensor and attempt to reduce the
Electromagnetic Interference caused by the components. The options are
Enabled and Disabled.
DRAM Data Integrity Mode
If enabled, this feature allows the data stored in the DRMA memory to
be integrated for faster data processing. The options are 72-bit ECC,
144-bit ECC, Auto, Algorithms and Disabled.
ECC Error Type
This setting lets you select which type of interrupt to be activated as a
result of an ECC error. The options are None, NMI (Non-Maskable
Interrupt), SMI (System Management Interrupt) and SCI (System Control
Interrupt.)
SERR Signal Condition
This setting specifies the conditions required to be qualified as an ECC
error. The options are None, Single Bit, Multiple Bit and Both.
7-12
Advertisement
Table of Contents
