Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. You need a user name
(PPPoE name) and password from you ISP.
1 Select Net Settings in the first menu screen (use the up or down arrow to
highlight it and then press the Left key).
2 Select Network Mode.
3 Select PPPoE.
4 Select PPPoE Name.
5 Use the left arrow button to clear the default text. Use the up and down arrows
to select the type of characters. Enter your PPPoE name. Use the Left key to
select Ok when you are done.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Prestige 2000W Quick Start Guide
11
4. Net Settings
5. SIP Settings
6. Settings
Select
Back
1. Network Mode
2. IP Address
3. Subnet Mask
Select
Back
[3] PPPoE
[1] Fixed IP
[2] DHCP
Select
Back
2. PPPoE Name
3. PPPoE Pwd
1. Network Mode
Select
Back
PPPoE Name
pppoe_username
Ok
Aa1@
Clear