Chapter 26 Igmp; Overview; Configuring; Figure 82 Igmp - ZyXEL Communications ZyXEL Dimension GS-4012F User Manual

This chapter shows you how to configure IGMP.

26.1 Overview

IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
membership in a multicast group - it is not used to carry user data. Refer to RFC 1112 and RFC
2236 for information on IGMP versions 1 and 2 respectively.
The switch supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). At start up,
the switch queries all directly connected networks to gather group membership. After that, the
switch periodically updates this information.

26.2 Configuring

Click IP Application, IGMP in the navigation panel to display the screen as shown next.
Each entry in the table is automatically created when you configure a new IP domain in the IP
Setup screen (refer to

Figure 82 IGMP

The following table describes the labels in this screen.
Table 62 IGMP
LABEL DESCRIPTION
Active Select this check box to enable IGMP on the switch.
Note: You cannot enable both IGMP snooping and IGMP at the same time.
Index This field displays an index number of an entry.

Chapter 26 IGMP

Section 7.7 on page
Refer to the section on IGMP snooping.
GS-4012F/4024 User's Guide
C
H A P T E R
78).
2 6
IGMP
171