ZyXEL Communications ZyXEL Dimension GS-4012F User Manual page 263

GS-4012F/4024 User's Guide
Table 96 interface port-channel Commands (continued)
COMMAND
pvid <1-4094>
qos
speed-duplex
spq
test
262
broadcast-limit
diffserv
dlf-limit
egress-set <port-
list>
flow-control
gvrp
igmp-filtering
profile
igmp-group-limit
igmp-immediate-
leave
inactive
ingress-check
intrusion-lock
mirror
multicast-limit
vlan-trunking
priority <0 .. 7>
<auto|10-half|10-
full|100-half|100-
full|1000-full>
Chapter 40 Introducing the Commands
DESCRIPTION
Disables broadcast storm
control limit on the port(s).
Disables DiffServ on the port(s).
Disables destination lookup
failure (DLF) on the switch.
Disables the egress port setting.
Disables flow control on the
port(s).
Disable GVRP on the port(s).
Disables IGMP filtering.
Disables IGMP group limitation.
Disables the IGMP immidiate
leave function.
Enables the port(s) on the
switch.
Disables ingress checking on
the port(s).
Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected
the cable.
Disables port mirroring on the
port(s).
Disables multicast limit on the
port(s).
Disables VLAN trunking on the
port(s).
The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
Sets the quality of service
priority for an interface.
Sets the duplex mode ( half
full ) and speed ( 10 , 100
1000 Mbps) of the connection
on the interface. Selecting
auto (auto-negotiation) makes
one port able to negotiate with a
peer automatically to obtain the
connection speed and duplex
mode that both ends support.
Sets the port(s) to use Strict
Priority Queuing.
Performs an interface loopback
test.
or
or