Cluster Management Status; Figure 140 Cluster Management: Status; Table 86 Cluster Management: Status - ZyXEL Communications ZyXEL Dimension GS-4012F User Manual

GS-4012F/4024 User's Guide

35.2 Cluster Management Status

Click Management, Cluster Management in the navigation panel to display the following
screen.
Note: A cluster can only have one manager.

Figure 140 Cluster Management: Status

The following table describes the labels in this screen.

Table 86 Cluster Management: Status

LABEL
Status
Manager
The Number of
Member
Index
HwAddr
Name
Model
Status
222
DESCRIPTION
This field displays the role of this switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member switch directly
and not via the cluster manager)
None (neither a manager nor a member of a cluster)
This field displays the cluster manager switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following
fields describe the cluster member switches.
You can manage cluster member switches via the cluster manager switch. Each
number in the Index column is a hyperlink leading to the cluster member switch's web
configurator (see Figure 141 on page
This is the cluster member switch's hardware MAC address.
This is the cluster member switch's System Name.
This field displays the model name.
This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or the switch
was set as the manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after
the link between cluster member and manager goes down)
223).
Chapter 35 Cluster Management