Show Classifier - ZyXEL Communications ZyXEL Dimension GS-4012F User Manual

Table 94 Command Summary: Enable Mode (continued)
COMMAND
<port-num>
no logging
ping
<IP|host-
name>
[vlan <vlan-id>][..]
reload config <index>
show classifier
cluster
dhcp
diffserv
garp
hardware-monitor
https
igmp-filtering
igmp-snooping
interface <port-
number>
interfaces config
<port-list>
Chapter 40 Introducing the Commands
DESCRIPTION
Removes all learned MAC address on the
specified port(s).
Disables syslog logging.
Sends Ping request to an Ethernet
device.
Sends Ping request to an Ethernet device
in the specified VLAN(s).
Restarts the system and use the specified
configuration file.
Displays all classifier related information.
Displays the specified classifier related
[name]
information.
Displays cluster management status.
Displays cluster candidate information.
candidates
Displays the MAC address of the cluster
member
member(s).
Displays the configuration of the cluster
members config
member(s).
Displays the status of the cluster
member mac <mac-
member(s).
addr>
relay Displays DHCP relay settings.
Displays DHCP server settings.
server
Displays DHCP server settings in a
server <vlnd-id>
specified VLAN.
Displays general DiffServ settings.
Displays GARP information.
Displays current hardware monitor
<C|F>
information with the specified temperature
unit (Celsius C or Fahrenheit F).
Displays the HTTPS information.
Displays the HTTPS certificates.
certificate
key <rsa|dsa> Displays the HTTPS key.
Displays current HTTPS session(s).
session
Displays the HTTPS session timeout.
timeout
Displays IGMP filtering profile settings.
profile [name]
Displays global IGMP snooping settings.
Displays current interface status.
Displays current interface configuration.
GS-4012F/4024 User's Guide
243