Weighing With Wheelchair; Taring - KERN MWA Series Operating Manual

11.1.1 Weighing with wheelchair

 Place wheelchair and patient in the centre of the weighing balance.
 Engage brakes on wheelchair
Do not leave the patient unattended
 Wait until patient is sitting still and read weighing value 1.
 Loosen the brakes and carefully pull off the transportation stretcher/wheelchair
with patient
 Then weigh the wheelchair without the patient and deduct the result from
weighing value 1, from this follows the weight for the patient.

11.2 Taring

The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the person is displayed in subsequent weighings.
 Put an object (such as a towel, support or empty wheelchair)
(example)
 Press
 Allow the person to step onto the centre of the weighing
(example)
 When the balance is unloaded the saved taring value is
 To delete the stored tare value, release scales and press
MWA-BAPS-e-1711
on the weighing pan.
, the zero display appears.
„NET" is shown at the bottom on the left.
platform.
Wait until the standstill display „STABLE" appears, then read
the weighing result.
displayed with negative sign.
.
19