Display Additional Last Decimal Place; Calculation Of The Body Mass Index; Calculating Body Mass Index - KERN MWA Series Operating Manual

11.4 Display additional last decimal place

(short-time, additional decimal place)
Press and hold for about 2 s whilst weighed result is being shown. The second
decimal place will be shown for approx. 5 s.
This value is not considered as verified and may not be used for the purpose of a
verified balance.

11.5 Calculation of the Body Mass Index

You need to know a person's body height before you can calculate the BMI for that
person. This should be known.

11.5.1 Calculating Body Mass Index

 Start balance by pressing
 Wait for stability display „STABLE to appear.
 Press
 To enter body height, press the
 Confirm entered value by
 Allow the person to step onto the centre of the weighing
 Unload weighing plate
 Return to weighing mode using
MWA-BAPS-e-1711
.
The most recently entered body height will be shown with the
enable digit flashing. The BMI symbol lights up.
platform.
„---------„ is shortly displayed, followed by the BMI value of the
person.
The BMI symbol will disappear and the kg display will
reappear.
and key.
. BMI „0.0" is displayed
21