10.9 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. During this warming
up time the balance must be connected to the power supply (mains, accumulator or
battery) and be switched on.
The accuracy of the balance depends on the local acceleration of gravity.
The value of gravity acceleration is shown on the type plate.
11 Operation
11.1 Weighing
Start balance by pressing
However, you can reset the weighing scale to zero by pressing
Have person stand in the centre of the scales. Wait until the
If the person is heavier than the weighing range, "OL"
18
The balance will carry out a self-test
The scales are ready for operation as soon as the weight
display for "0.0 kg" has appeared.
the
key.
standstill display „STABLE" appears, then read the weighing
result.
(=overload) will appear in the display.
.
MWA-BAPS-e-1711