Scope Of Delivery; Mains Connection; Rechargeable Battery Operation; Initial Commissioning - KERN GAB-P Series Operating Manual

Table scales
Table of Contents

Advertisement

6.3 Scope of delivery

Serial accessories:
• Balance, see chap. 2
• Mains adapter
• Rechargeable battery
• Operating manual

6.4 Mains connection

Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use KERN original mains adapter. Using other makes requires consent by
KERN.

6.5 Rechargeable battery operation

The rechargeable battery is charged via the delivered power supply.
Before the first use, the battery should be charged by connecting it to the mains
power supply for at least 12 hours.
The appearance of the battery symbol
battery is almost exhausted.
To charge the chargeable battery, connect the mains cable.
The LED display informs you during loading about the loading status of the
rechargeable battery.
• If the LED lights green, the rechargeable battery is fully charged.
• When the battery is being recharged, the LED lights red

6.6 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. During this warming
up time the balance must be connected to the power supply (mains, accumulator or
battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
16
in the weight display indicates that the
GAB-P-BA-e-1613

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gab 6k-5pGab 10k-4pGab 30k-4p

Table of Contents