KERN GAB-P Series Operating Manual page 27

Settings:
 In weighing mode press
the symbol „HI" will be displayed.
 Enter upper limit by pressing
 Acknowledge with
The weighing scales will change to the display of the lower
limit.
 Enter the lower limit value and confirm with
 The scales will change to zero display
Weighing with tolerance range
 Tare when using a weighing container.
 Put on material to be weighed, tolerance control is started.
 The tolerance control is not active when the weight is under
 To finish tolerance weighing, set both limit values to zero.
GAB-P-BA-e-1613
, the left number flashes and
and
.
20d.
.
(example)
(example)
27