Chapter 8: Replacing The Hard Drive; Procedure; Post-Requisites - Dell Inspiron 24 3477 All-in-One Service Manual

Hide thumbs Also See for Inspiron 24 3477 All-in-One:
Table of Contents

Advertisement

NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Hard drives are fragile. Exercise care when handling the hard drive.

Procedure

Steps
1. Place the hard drive in the hard-drive bracket with the label facing up.
2. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket .
3. Replace the four screws (M3x3.5) that secure the hard-drive bracket to the hard drive.
4. Align the socket on the hard-drive assembly with the connector on the system board.
5. Slide the hard-drive assembly to connect the hard-drive assembly to the system board.
6. Replace the screw (M3x5) that secures the hard-drive assembly to the display-assembly base.

Post-requisites

Steps
1. Replace the
back
cover.
2. Replace the stand.
18
Replacing the hard drive
Replacing the hard drive
computer. After working inside your computer, follow the instructions in
8
After
www.dell.com/

Advertisement

Table of Contents
loading

This manual is also suitable for:

W21c

Table of Contents