Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
NOTE: You must correctly align the optical-drive bracket to ensure that
the optical drive can be properly secured to the computer. For correct
orientation, see step 5 in
2
Replace the screws that secure the optical-drive bracket to the optical drive.
3
Align the tabs on the optical-drive bezel with the slots on the optical-drive
assembly and snap it into place.
4
Slide the optical-drive assembly into the optical-drive bay and snap it into place.
Post-requisites
Replace the stand.
22
computer. After working inside your computer, follow
After working inside your
"Removing the optical
computer. For more safety best
www.dell.com/
drive".
Before