Cooling/Heating/Fan Operation; Dehumidifying Operation; Adjusting Air Flow Direction - Vivax ACP-12CH35AEEI PRO User Manual

ENG
Cooling /Heating/Fan operation
1. Press the MODE button to select COOL,
HEAT (cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
can be set within a range of 17°C~30°C
in 1°C increments.
3. Press the FAN button to select the fan
speed in four steps- Auto, Low, Mid, or
High.
4.
Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature
is not displayed in the remote controller
and you are not able to control the room
temperature either. In this case, only step
1, 3 and 4 may be performed.

Dehumidifying operation

1. Press the MODE button to select DRY
mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
can be set within a range of 17°C~30°C
in 1°C increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not
switch the fan speed. It has already been
automatically controlled.
Adjusting air flow direction (option)
1. When push the SWING UP/DOWN
button, the horizontal louver changes 6
degree in angle for each push. If pushing
more than 2 seconds, the louver will
automatically swing up and down.
33
-
VIVAX