How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation - Vivax ACP-09PT25AEF User Manual

SET TEM PER ATURE( C)
AUTO
COOL
DRY
HEAT
TEMP
2
ON/OFF
MODE
1
SWING
ECONOMY
RESETLOCK
LED
DISPLAY
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
TEMP
2
ON/OFF
MODE
1
SWING ECONOMY
RESETLOCK
LE D
DISP LAY

How to use the buttons

FAN
HIGH
MED Ensure the unit is plugged in and power is
LOW
avai lable. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the
3
2. Press the
FAN SPEED
temperature. The temperature can be set
TIMERON
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
TIMER OFF
3. Press the
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set temper-
ature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
FAN
HIGH
Ensure the uni t is pl ugged in and power is
MED
LOW available.
1. Press the
(cooling & heating models only) or FAN mode.
2. Press the
4
FAN SPEED temperature. The temperature can be s et
3
within a range of
TI M ERO N
increments.
TIMER OFF 3. Press the
fan speed in four s teps - Auto, Low, Med,or High.
4. Press the
conditi oner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.

Auto operation

MODE button to select Auto.
TEMP button to set the desired
ON/OFF button to start the air
MODE button to select COOL, HEAT,
T EMP
button to set the desired
17 C(62 F)~ 30 C in 1 C(2 F)
FAN SPEED button to s elect the
ON/OFF butt on to start the ai r