Cooling/Heating/Fan Operation - Vivax ACP-12CH35AEHI+ R32 User Manual

VIVAX
Cooling /Heating/Fan operation
1. Press the MODE button to select COOL,
HEAT (cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17°C~30°C in 1°C
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Mid, or High.
4.
Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is
not displayed in the remote controller and
you are not able to control the room
temperature either. In this case, only step 1,
3 and 4 may be performed.
AUTO:
In AUTO mode, the unit will automatically
select the COOL, FAN, or HEAT operation
based on the set temperature.
1. Press the MODE button to select Auto.
2. Press the ▲/▼ button to set the desired
temperature. The temperature can be set
within a range of 17°C~30O°C in 10°C
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can
logically choose the mode of Cooling,
Fan, and Heating
difference between the actual ambient
room temperature
temperature on the remote controller.
2. In the Auto mode, you can not switch the
fan speed.
automatically controlled.
3. If the Auto mode is not comfortable for
you, the desired mode can be selected
manually.
32
by sensing
and the
It has already
ENG
the
setting
been