Timer Operation - Vivax ACP-12CH35AEEI PRO User Manual

VIVAX

Timer operation

Press the TIMER ON button can set the auto-on time of the unit. Press the
TIMER OFF button can set the auto-off time of the unit.
To set the Timer-ON:
1. Press the TIMER ON button.
2. Press Temp. up or down button for multiple times to set the desired time
to turn on the unit.
NOTE: If you want to set 2.5 h timer, you will press 5 times to set it (5 x
0,5 h).
3. Point remote to unit and wait 1sec, the TIMER ON will be activated.
To set the Timer-OFF:
1. Press TIMER button to initiate the OFF time sequence.
2. Press Temp. up or down button for multiple times to set the desired time
to turn off the unit.
NOTE: If you want to set timer off in 5 hours, you will press 10 times to set
it (10 x 0,5 h).
3. Point remote to unit and wait 1sec, the TIMER OFF will be activated.
NOTE:

When setting the TIMER ON or TIMER OFF, the time will increase by 30
minutes increments with each press, up to 10 hours. After 10 hours and
up to 24, it will increase in 1 hour increments. (For example, press 5 times
to get 2.5h, and press 10 times to get 5h,) The timer will revert to 0.0 after
24.

Cancel either function by setting its timer to 0.0h.
Example of timer setting
Example: If current timer is 1:00PM, to set the timer as above steps, the unit
will turn on 2.5h later (3:30PM) and turn off at 6:00PM.
Timer
starts
Current
Time 1PM
Unit
turns ON
34
ENG
Unit
turns OFF