How To Use The Buttons; Auto Operation - Vivax ACP-12CH35AEEI PRO User Manual

VIVAX
Timer On/Off:
This Timer indicator lights when Time ris turned on or off.
6. Temperature/Timer/Fan speed display
Displays the set temperature by default, or fan speed or timer setting
when using TIMER ON/OFF functions.
Displays the temperature setting (17°C~30°C). When you set the
operating mode to FAN, no temperature setting is displayed. And if in
the TIMER mode, shows the ON and OFF settings of the TIMER.
7. Fan speed display
Displays selected fan speed: Low/ Med/ High or Auto.
NOTE: This fan speed can not be adjusted in AUTO or DRY mode.

How to use the buttons?

Auto operation

Ensure the unit is plugged in and power is available. The OPERATION
indicator on the display panel of the indoor unit starts flashing.
AUTO:
In AUTO mode, the unit will automatically
select the COOL, FAN, or HEAT operation
based on the set temperature.
1. Press the MODE button to select Auto.
2. Press the ▲/▼ button to set the desired
temperature. The temperature can be set
within a range of 17°C~30O°C in 10°C
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can
logically choose the mode of Cooling,
Fan, and Heating
difference between the actual ambient
room temperature
temperature on the remote controller.
2. In the Auto mode, you can not switch the
fan speed.
automatically controlled.
3. If the Auto mode is not comfortable for
you, the desired mode can be selected
manually.
32
by sensing
and the
It has already
ENG
the
setting
been