Cooling/Heating/Fan Operation; Dehumidifying Operation; Adjusting Air Flow Direction - Vivax R+DESIGN ACP-09CH25AERI+ R32 User Manual

VIVAX
Cooling /Heating/Fan operation
1. Press the MODE button to select COOL,
HEAT (cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17°C~30°C in 1°C
increments.
3. Press the FAN button to select the fan
speed in four steps- Auto, Low, Mid, or
High.
4.
Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is
not displayed in the remote controller and
you are not able to control the room
temperature either. In this case, only step 1,
3 and 4 may be performed.

Dehumidifying operation

1. Press the MODE button to select DRY
mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17°C~30°C in 1°C
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not
switch the fan speed. It has already been
automatically controlled.
Adjusting air flow direction (option)
1. When push the SWING UP/DOWN button,
the horizontal louver changes 6 degree in
angle for each push. If pushing more than 2
seconds, the louver will automatically swing
up and down.
26
ENG