Recommended Accessories - Oneida Air Systems BenchTop Owner's Manual

recommended accessories

BenchTop Filter pack: Washable MERv 5 pre-Filter and
MERv 15 Deep-pleated Filter
#FCS000100
• MERV 15 deep-pleated filter made of electrostatically charged synthetic materials that attract
and capture most airborne particulates.
• Rigid MERV 5 open-cell polyester Pre-Filter serves to protect and prolong the lifespan of the
Main Filter.
115v ivAC pro Automated Dust Control Switch
#ARS115200
• Set the dust collector to turn off after 5/15/45 seconds after all tools have been powered down
to allow for complete cleaning.
• Includes 1 Remote Control with belt-clip.
• Switch receives signals from up to 40ft away in any direction.
ivAC pro Tool plus Automatic power Sensor
#ARS000002
• Up to 8 tool sensors can be synced to the same switch.
• Transmits radio frequency signal to the iVAC Pro Switch from up to 40ft away.
• AUTO setting turns on the dust collector only when the tool is on. ON/OFF modes allow for
direct manual control of the collection system.
Dust-Free Router Hood with Hose Whip
#AXH000200
• Lets you clean while you work, containing waste safely within your wet/dry vacuum.
• Eliminates downtime for cleanup and helps maintain a safe, healthy, and productive work site.
• Lessens wear and tear on expensive router bits by reducing material buildup.
viper vacuum Scraper paint Removal Tool
#AXS001160B
• Collects chips, dust, and debris at the source, safely containing them in your wet/dry vacuum.
• Lightweight, ergonomic design, and highly textured grip.
• It's ideal for most scraping projects including paint, wood, glue, stucco, floors, boats, and even
lead abatement/removal and lead RRP when connected to a HEPA-certified vacuum.
oneida-air.com 17