Lexmark MX421 User Manual page 95

Understanding the printer menus
Menu item
Substitute Size
Off
Statement/A5
Letter/A4
All Listed*
Configure MP
Cassette*
Manual
First
Note: An asterisk (*) next to a value indicates the factory default setting.
Media Configuration
Universal Setup
Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3.00–14.17 inches (8.50*)
76–360 mm (216*)
Portrait Height
3.00–14.17 inches (14*)
76–360 mm (356*)
Feed Direction
Short Edge*
Long Edge
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to substitute a specified paper size if the requested size is not
loaded in any paper source.
Notes:
•
Off prompts the user to load the required paper size.
•
Statement/A5 prints A5‑size document on statement when loading
statement, and statement‑size jobs on A5 paper size when loading A5.
•
Letter/A4 prints A4‑size document on letter when loading letter, and
letter‑size jobs on A4 paper size when loading A4.
•
All Listed substitutes Letter/A4.
Set the printer when to pick paper loaded in the multipurpose feeder.
Notes:
•
When set to Cassette, the printer treats the multipurpose feeder like a
tray.
•
When set to Manual, the printer treats the multipurpose feeder like a
manual feeder.
•
When set to First, the printer picks paper from the multipurpose feeder
until it is empty, regardless of the required paper source or paper size.
Description
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the portrait width of the universal paper.
Set the portrait height of the universal paper.
Set the printer to pick paper from the short edge or long edge
direction.
Note: Long Edge appears only when the longest edge is shorter
than the maximum width supported.
95