Lexmark MX421 User Manual page 133

Understanding the printer menus
Menu item
Job Buffering
On
Off*
Mac Binary PS
Auto*
On
Off
Wi‑Fi Direct
Menu item
Enable Wi‑Fi Direct
On
Off*
Wi‑Fi Direct Name
Wi‑Fi Direct Password
Show Password on Setup Page
Off
On*
Preferred Channel Number
1–11
Auto*
Group Owner IP Address
Auto‑Accept Push Button
Requests
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Ethernet
Menu item
Network Speed
IPv4
Enable DHCP
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Temporarily store print jobs in the printer hard disk before printing.
Note: This menu item appears only when a hard disk is installed.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Description
Set the printer to connect directly to Wi-Fi devices.
Specify the name of the Wi‑Fi Direct network.
Set the password to authenticate and validate users on a Wi‑Fi connection.
Show the Wi‑Fi Direct Password on the Network Setup Page.
Set the preferred channel of the Wi‑Fi network.
Specify the IP address of the group owner.
Accept requests to connect to the network automatically.
Note: Accepting clients automatically is not secured.
Description
Show the speed of an active network adapter.
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to distribute IP
addressing and configuration information dynamically to clients.
133