Page 2
Required Tools: Wall Anchor Phillips Screwdriver Drill Level Tap Head Screw Mounting Cleat Large Drying Rack Page 2 of 3...
Page 3
STEP 1: Determine exact location of Drying Rack on wall. Using a level, place Mounting Cleat (C) in desired location and use a pencil to mark three holes. NOTE: At least two (preferably all) screws must be driven into a stud. Use a drill to create small holes in drywall and insert an Anchor (A) into the open drywall holes, but NO hole or anchor over a stud.
Need help?
Do you have a question about the MI442 LRG and is the answer not in the manual?
Questions and answers