Related Manuals for Ballard Designs Mia MS102
Summary of Contents for Ballard Designs Mia MS102
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Mia Cabinet ITEM NUMBER: MS102 ASSEMBLED DIMENSIONS : 34”H x 35”W x 16”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 11-26-2019 Page 1 of 4...
- Page 2 NOTE: Assemble Cabinet in location for use. REQUIRED TOOLS: Shelf & Hardware Phillips Screwdriver Located Here -Two person assembly suggested. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until assembly and installation are complete.
- Page 3 STEP 1: Determine height for Shelf (D) then insert Shelf Supports (A) into corresponding pre-drilled holes. LEVELERS: Cabinet is equipped with Rotary Levelers under each corner. If necessary, Cabinet may be leveled by gently lifting a corner and turning levelers clockwise/counterclockwise. Customer Service: 800-367-2810 Page 3 of 4 Online: www.ballarddesigns.com...
- Page 4 HARDWARE PART B: ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Small Screw WARNING Tip-Over Hazard Large Screw WALL BRACKET MUST BE ATTACHED TO WALL STUD Prevent tipping accidents. Anchor your furniture. Serious or fatal crushing injuries can occur from a furniture tip-over Bracket Retention Belt Installation:...