Table of Contents
Advertisement
en Cleaning assistance
18.1 Cleaning recommendation
The appliance records the type and duration of the op-
eration and, if required, recommends which cleaning
function to use.
When you switch on the appliance, a notification ap-
pears in the display stating that you should use the
cleaning function. Start the cleaning function as soon
as possible.
You can use your appliance as normal. However, the
cleaning setting appears in the display until you have
run the cleaning function in full.
Note: If the appliance is prematurely contaminated, e.g.
by greasy poultry or roasts, or if dark spots appear on
the self-cleaning surfaces, do not wait until the notifica-
tion appears in the display before you use the cleaning
functions. The more often you use the cleaning func-
tion, the longer the cleaning ability of the self-cleaning
surfaces is retained.
18.2 Preparing the appliance for the
cleaning function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
▶
Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
1.
Remove accessories and cookware from the cook-
ing compartment.
2.
Detach the shelf supports and remove them from
the cooking compartment.
→ "Rails", Page 32
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stains that cannot be removed.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
19 Cleaning assistance
The cleaning assistance is a quick alternative for occa-
sionally cleaning the cooking compartment. The clean-
ing assistance softens dirt by vaporising the soapy wa-
ter. It is then easier to remove dirt.
19.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
▶
Never pour water into the cooking compartment
when the cooking compartment is hot.
Requirement: The cooking compartment has cooled
down completely.
26
18.3 Setting the cleaning function
Ventilate the kitchen while the cleaning function is run-
ning.
WARNING ‒ Risk of burns!
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
Requirement: → "Preparing the appliance for the
cleaning function", Page 26.
1.
Press
.
2.
In the operating mode menu, select the "Cleaning
function".
a The duration appears in the display. The duration of
one hour cannot be changed.
3.
Press
to start.
Note: Do not open the appliance door while the
cleaning function is running. The cleaning result
would no longer be correct and the operation is in-
terrupted.
a The cleaning function starts and the duration counts
down.
a When the cleaning function comes to an end, an
audible signal sounds and a note appears in the
display.
4.
Press
to switch the appliance off.
5.
→ "Wiping the appliance clean following the clean-
ing function", Page 26.
18.4 Wiping the appliance clean following
the cleaning function
1.
Allow the appliance to cool down.
2.
Wipe the cooking compartment with a damp cloth.
Note: Marks may appear on the self-cleaning sur-
faces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the self-
cleaning surfaces.
3.
Attach the shelf supports.
→ "Rails", Page 32
1.
Remove the accessories from the cooking compart-
ment.
2.
Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
Do not use distilled water.
3.
Press
.
a A type of heating and a temperature appears.
4.
Use the rotary selector to set the bottom heat
type of heating.
5.
Press the temperature.
6.
Use the rotary selector to set the temperature to
80 °C.
7.
Press
.
Advertisement
Table of Contents
