Table of Contents
Advertisement
Battery Directive
to replace it, use the Return Material Authorization (RMA) process or contact an
Cd/Hg/Pb
authorized National Instruments service representative. For more information
about compliance with the EU Battery Directive 2006/66/EC about Batteries
and Accumulators and Waste Batteries and Accumulators, visit
environment/batterydirective
Unpacking
The cDAQ chassis ships in an antistatic package to prevent electrostatic discharge (ESD). ESD
can damage several components on the device.
Caution
To avoid ESD damage in handling the device, take the following precautions:
•
Ground yourself with a grounding strap or by touching a grounded object.
•
Touch the antistatic package to a metal part of your computer chassis before removing the
device from the package.
Remove the device from the package and inspect it for loose components or any other signs of
damage. Notify NI if the device appears damaged in any way. Do not install a damaged device
in your computer or chassis.
Store the device in the antistatic package when the device is not in use.
Installing the NI cDAQ-9138/9139 for Windows
(NI cDAQ-9138/9139 for Windows)
preloaded Windows Embedded Standard 7 (WES7), LabVIEW (evaluation version), and
NI-DAQmx driver software. The cDAQ chassis and C Series I/O module(s) are packaged
separately. You will require a monitor, VGA cable, and computer mouse and keyboard to
complete this installation process. You will also require number 1 and number 2 Phillips
screwdrivers to install and set up the cDAQ chassis.
Table 1-1 lists the earliest NI-DAQmx support version for each cDAQ
Note
chassis with Windows.
This device contains a long-life coin cell battery. If you need
Never touch the exposed pins of connectors.
The NI cDAQ-9138/9139 for Windows is shipped with
NI cDAQ-9138/9139 User Manual
.
© National Instruments | 1-5
ni.com/
Advertisement
Table of Contents
