Special Conditions For Marine Applications; Preparing The Environment; Unpacking The Kit - National Instruments cRIO-9034 Getting Started Manual

Special Conditions for Marine Applications

Some products are Lloyd's Register (LR) Type Approved for marine (shipboard) applications.
To verify Lloyd's Register certification for a product, visit
the LR certificate, or look for the Lloyd's Register mark on the product.
Caution
product in a shielded enclosure with shielded and/or filtered power and input/output
ports. In addition, take precautions when designing, selecting, and installing
measurement probes and cables to ensure that the desired EMC performance is
attained.

Preparing the Environment

Ensure that the environment in which you are using the cRIO-9034 meets the following
specifications.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)
Operating humidity (IEC 60068-2-56)
Pollution degree
Maximum altitude
Indoor use only.
Note
Refer to the device specifications on
specifications.

Unpacking the Kit

Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
4 | ni.com | NI cRIO-9034 Getting Started Guide
In order to meet the EMC requirements for marine applications, install the
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
ni.com/certification
-20 °C to 55 °C
10% RH to 90% RH, noncondensing
2
5,000 m
ni.com/manuals
and search for
for complete