Unpacking The Kit; Verifying The Kit Contents; Installing Software On The Host Computer - National Instruments NI cRIO-9065 Getting Started Manual

Indoor use only.
Note Refer to the device specifications on
specifications.

Unpacking the Kit

Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify that the following items are included in the cRIO-9065 kit.
1. cRIO Device
2. USB A-to-B Cable

Installing Software on the Host Computer

Before using the cRIO-9065, you must install the following application software and device
drivers on the host computer in this order:
1. LabVIEW 2014 SP1 or later
2. LabVIEW Real-Time Module 2014 SP1 or later
4 | ni.com | NI cRIO-9065 Getting Started Guide
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
Figure 1. cRIO-9065 Kit Contents
1
ni.com/manuals
2 3
3. NI CompactRIO Device Drivers Media
4. Getting Started Guide
for complete
4