Table of Contents
Advertisement
Caution
either special considerations or user-installed, add-on devices. Refer to the following
sections for more information.
Related Information
Connecting the cRIO-9036 to Ground
Connecting the cRIO-9036 to Power
Special Conditions for Marine Applications
Some products are Lloyd's Register (LR) Type Approved for marine (shipboard) applications.
To verify Lloyd's Register certification for a product, visit
the LR certificate, or look for the Lloyd's Register mark on the product.
Caution
product in a shielded enclosure with shielded and/or filtered power and input/output
ports. In addition, take precautions when designing, selecting, and installing
measurement probes and cables to ensure that the desired EMC performance is
attained.
Preparing the Environment
Ensure that the environment in which you are using the cRIO-9036 meets the following
specifications.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)
Operating humidity (IEC 60068-2-56)
Pollution degree
Maximum altitude
Indoor use only.
Note
Refer to the device specifications on
specifications.
Unpacking the Kit
Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
4 | ni.com | NI cRIO-9036 Getting Started Guide
To ensure the specified EMC performance, product installation requires
on page 7
on page 8
In order to meet the EMC requirements for marine applications, install the
To prevent electrostatic discharge (ESD) from damaging the device,
ni.com/certification
-40 °C to 70 °C
10% RH to 90% RH, noncondensing
2
5,000 m
ni.com/manuals
and search for
for complete
Advertisement
Table of Contents
