Table of Contents
Advertisement
Indoor use only.
Note
Refer to the device specifications on
specifications.
Unpacking the Kit
Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the cRIO-9035 kit.
1
1. cRIO Device with Power Connector and SD Card
Slot Cover
2. USB A-to-B Cable
3. Ferrite (x2)
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
Figure 1. cRIO-9035 Kit Contents
ni.com/manuals
2
3
4. NI-RIO Device Drivers Media
5. Getting Started Guide
NI cRIO-9035 Getting Started Guide | © National Instruments | 5
for complete
4
5
Advertisement
Table of Contents
