Danfoss VLT AutomationDrive FC 300 Instruction Manual page 79

Warnings and Alarms
ALARM 82, CSIV par. err.
CSIV failed to init a parameter.
ALARM 85, Dang fail PB:
Profibus/Profisafe Error.
WARNING/ALARM 104, Mixing fan fault
The fan monitor checks that the fan is spinning at power-
up or whenever the mixing fan is turned on. If the fan is
not operating, then the fault is annunciated. The mixing-
fan fault can be configured as a warning or an alarm trip
by 14-53 Fan Monitor.
Troubleshooting Cycle power to the adjustable frequency
drive to determine if the warning/alarm returns.
WARNING 250, New spare part
A component in the adjustable frequency drive has been
replaced. Reset the adjustable frequency drive for normal
operation.
WARNING 251, New type code
The power card or other components have been replaced
and the type code changed. Reset to remove the warning
and resume normal operation.
®
VLT Automation Drive D-Frame
Instruction Manual
®
MG34U222 - VLT is a registered Danfoss trademark
8 8
8-11