Checking the oil level in the
transmission
(Not Rider 11)
Remove the transmission cover. Loosen both
screws (one on each side) and lift off the
transmission cover.
Check that there is oil in the transmission's oil
tank. Fill if necessary with engine oil SAE 10W/30
(class SF–CC).
IMPORTANT INFORMATION
Check and top up with oil after each test
drive. The oil level will drop if there are
air pockets in the transmission.
Wheels
Fit the wheels (certain markets). The tyre
pressures should be 60 kPa (0,6 kp/cm
on all the wheels.
To improve the driving capacity the pressure in the
back tyres can be reduced to 40 kPa
(0,4 kp/cm
2
/5,6 PSI).
Maximum permitted pressure is 100 kPa
(1,0 kp/cm
2
/14 PSI).
IMPORTANT INFORMATION
Different pressures in the front tyres will
cause the blades to cut the grass at
different heights.
Checking and adjusting of the mowing
deck's ground pressure and
parallelism
Carried out after checking the tyre pressures. See
respective sections in this Workshop Manual.
2
/8,5 PSI)
Delivery measures
13
English –