1.
Upper Case Unit
(1)
Turn off the power switch [1] .
(2)
Remove
•
Printer cover
•
Rear cover
•
Platen knob [2]
•
ROM cover [3]
•
Three screws [4]
Move the carriage unit [5] over to the right so that it
(3)
aligns with the cut-out of the upper case unit [6].
(4)
Remove
•
Upper case unit [6]
Lean the upper case unit [6] forward for re-
moval.
•
Cable [7] of control panel board.
2.
Control Panel Board
(1)
Remove
•
Upper case unit according to the procedure de-
scribed in item 1.
•
Two tapping screws [1]
•
Control panel board unit [2]
– 43 –
PARTS REPLACEMENT