Table of Contents
Advertisement
w
w
q
Created stitches (CS)
In this section, you can select original stitch patterns
created with Stitch Composer.
Refer to page 61 for how to transfer created stitch
patterns from the PC to the machine.
Quilting(Q)
Using the Quilting Guide Bar (Optional item)
The quilting guide bar (optional item) is helpful when
sewing parallel, evenly spaced rows of stitches.
q
Insert the quilting guide bar into the hole in the back of
the foot holder. Slide the quilting guide bar and set it to
the desired spacing.
q Quilting guide bar
w Hole
Sew rows of stitches while tracing the previous row of
stitches with the quilting guide bar.
Q1-Q3 Patchwork Piecing
Patterns Q1 to Q3 are special stitches for seaming
patchwork pieces.
Patterns Q2 and Q3 are for patchwork piecing with 1/4˝
q
and 7 mm seam allowances respectively.
Attach the zigzag foot A.
Place the patchwork pieces right sides together. Sew
while guiding the edge of the fabric to keep a precise 1/4˝
seam allowance.
q Wrong side of fabric
w
w Right side of the fabric
Angle Scales on the Needle Plate
You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
degrees.
Attach Zigzag foot A when using the angle scale.
Align the edge of the fabric to the 1/4˝ seam guide line.
q 1/4˝ seam guide line
q
57
Advertisement
Table of Contents
