ZKTeco SpeedFace-V5L TI User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. IP Access Controllers
  5. SpeedFace-V5L
  6. User manual

ZKTeco SpeedFace-V5L TI User Manual

Hide thumbs Also See for SpeedFace-V5L TI:
Table of Contents

Advertisement

Quick Links

Product Name and Model Number
User Manual
SpeedFace-V5L [TI]
Date: July 2020
Doc Version: 1.0
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
P a g e
| 1
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
User Manual

Advertisement

Table of Contents
loading

Related Manuals for ZKTeco SpeedFace-V5L TI

Summary of Contents for ZKTeco SpeedFace-V5L TI

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 2 Copyright © 2020 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
  • Page 3 SpeedFace-V5L [TI] User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
  • Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
  • Page 5 The general information which helps in performing the operations faster The information which is significant Care taken to avoid danger or mistakes The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 6: Table Of Contents

    ERIAL PC C ......................................40 ONNECTION ..................................... 41 IRELESS ETWORK ....................................43 LOUD ERVER ETTING ......................................44 IEGAND ETUP 7.6.1 WIEGAND INPUT ......................................44 7.6.2 WIEGAND OUTPUT ...................................... 47 P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 7 EGISTRATION OF ISIBLE IGHT MAGES .......................... 86 EQUIREMENTS FOR ISIBLE IGHT IGITAL MAGE APPENDIX 2 ............................... 87 .................................. 87 TATEMENT ON THE IGHT TO RIVACY ...................................... 88 FRIENDLY PERATION P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 8: Safety Measures

    Lightning - External lightning conductors can be installed to protect against electrical storms. It stops power-ups destroying the system. The devices should be installed in areas with limited access. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 9: Overview

    Temperature Measurement Distance: 30cm ~ 120cm (0.98ft~ 3.94ft). • Temperature Measurement Accuracy: ±0.3°C (±0.54°F) (Tested at a distance of 80cm (2.63ft) under 25°C (77° F) temperature) • Temperature Measurement Range: 20°C ~ 50°C (68°F ~ 122°F) P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 10: Instruction For Use

    The distance between the device and a user whose height is in a range of 1.55m-1.85m is recommended to be 0.3-2.5m. Users may slightly move forward or backward to improve the quality of facial images captured. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 11: Palm Registration

    Place your palm in the palm multi-mode collection area, such that the palm is placed parallel to the device. Make sure to keep space between your fingers. NOTE: Place your palm within 30-50cm of the device. P a g e | 10 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 12: Face Registration

    If the glasses have been changed, authentication may fail. If the face without glasses has  been registered, authenticate the face without glasses further. If the face with glasses has been registered, authenticate the face with the previously worn glasses. P a g e | 11 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 13: Standby Interface

    The punch state options can also be displayed and used directly on the standby interface. Click anywhere on the screen apart from the icons, and six shortcut keys appears on the screen, as shown in the figure below: P a g e | 12 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 14 NOTE: The punch state options are off by default and need to be changed to other option in the "9.4 Punch States Options" in order to get the punch state options on the standby screen. P a g e | 13 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 15: Virtual Keyboard

    Press [123] to switch to the numeric and symbolic keyboard. • click [ABC] to return to the alphabetic keyboard. • Click the input box, virtual keyboard appears. • Click [ESC] to exit the virtual keyboard. P a g e | 14 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 16: Verification Mode

     Click the button on the main screen to enter 1:1 palm verification mode and input the user ID and press [OK], as shown in image below. P a g e | 15 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 17 Select the palm icon to enter palm verification mode. Then place your palm for verification. P a g e | 16 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 18: Fingerprint Verification

    Users may try verifying their identities with 1:1 verification mode when they cannot gain access with 1: N authentication method. Click the button on the main screen to enter 1:1 fingerprint verification mode and input the user ID and press [OK]. P a g e | 17 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 19 /password verification, the following screen will appear. Select the fingerprint icon to enter fingerprint verification mode. Then take fingerprint by pressing onto the fingerprint reader for verification. P a g e | 18 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 20: Facial Verification

    The following are the popups of the comparison result prompt interface. (Note: This function is only applicable to products with temperature measurement module.) P a g e | 19 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 21 When the user enables the Display Thermodynamics Figure function, the thermal image of the person is displayed in the upper left corner of the device, while verification. As shown in the images below: P a g e | 20 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 22 If the user has registered palm, fingerprint, and password in addition to face, and the verification method is set to palm/ fingerprint/ face /password verification, the following screen will appear. Select the icon to enter the face verification mode. P a g e | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 23: Password Verification

    The device compares the entered password with the registered password by the given User ID. Click the button on the main screen to enter the 1:1 password verification mode. Then, input the user ID and press [OK]. P a g e | 22 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 24 If the user has registered palm, fingerprint, and face in addition to password, and the verification method is set to palm/ fingerprint/ face /password verification, the following screen will appear. Select the icon to enter password verification mode. P a g e | 23 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 25 Input the password and press [OK]. Following are the display screen after a inputting a correct password and a wrong password respectively. Verification is successful: Verification is failed: P a g e | 24 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 26: Combined Verification

    This is because the Device compares the scanned fingerprint template of the person with registered verification template (both the Fingerprint and the Password) previously stored to that Personnel ID in the Device. P a g e | 25 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 27 User Manual • But as the employee has registered only the Fingerprint but not the Password, the verification will not get completed and the Device displays “Verification Failed”. P a g e | 26 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 28: Main Menu

    To automatically test whether each module functions properly, including the LCD Autotest Screen, Audio, Camera, Fingerprint sensor, and real-time clock. System Info To view Data Capacity and Device and Firmware information of the current device. P a g e | 27 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 29: User Management

    During the initial registration, you can modify your ID, which cannot be modified after registration. 4） If a message "Duplicated!" pops up, you must choose another ID as the enter User ID already exists. P a g e | 28 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 30: User Role

    A progress bar shows up while registering the palm and a “Enrolled Successfully” is displayed as the progress bar completes. • If the palm is registered already then, the “Duplicate Palm” message shows up. The registration interface is as follows: P a g e | 29 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 31: Fingerprint

    On the Enroll Fingerprint interface, select the finger to be enrolled. • After the selecting the required finger, press the same finger on the fingerprint reader three times. • Green indicates that the fingerprint was enrolled successfully. P a g e | 30 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 32: Face

    A progress bar shows up while registering the face and a “Enrolled Successfully” is displayed as the progress bar completes. • If the face is registered already then the “Duplicate Face” message shows up. The registration interface is as follows: P a g e | 31 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 33: Password

    Note: The password may contain 1 to 8 digits by default. 5.1.7 User photo Tap on User Photo in the New User interface to go to the User Photo registration page. P a g e | 32 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 34: Access Control Role

    New users belong to Group 1 by default and can be reassigned to other groups. The device supports up to 99 Access Control groups. • Tap Time Period, to select the time period to use. P a g e | 33 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 35: Search For Users

    Edit User On All Users interface, tap on the required user from the list and tap Edit to edit the user information. P a g e | 34 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 36: Delete User

    Delete Fingerprint Only: Deletes the fingerprint information of the selected user. Delete Password Only: Deletes the password information of the selected user. Delete Face Only: Deletes the Face information of the selected user. P a g e | 35 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 37: User Role

    On the User Defined Role interface, toggle Enable Defined Role to enable or disable the user defined role. • Tap on Name and enter the custom name of the role. P a g e | 36 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 38 But if there is no super administrator registered in the Device, then the device will prompt "Please enroll super admin first!” when enabling the User Role function. P a g e | 37 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 39: Communication Settings

    PC are connecting to the same network segment. Tap Ethernet on the Comm. Settings interface to configure the settings. P a g e | 38 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 40 Dynamic Host Configuration Protocol is to dynamically allocate IP addresses DHCP for clients via server. Display in Status Bar Toggle to set whether to display the network icon on the status bar. P a g e | 39 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 41: Serial Comm

    PC. Once the Comm Key is set, its connection password must be provided before the device gets connected to the PC software. Tap PC Connection on the Comm. Settings interface to configure the communication settings. P a g e | 40 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 42: Wireless Network

    • Tap on the appropriate WiFi name from the available list, and input the correct password in the password interface, and then tap Connect to WIFI (OK). P a g e | 41 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 43 NOTE: After successfully adding the WIFI manually, follow the same process to search for the added WIFI name. Click here to view the process to search the WIFI network. P a g e | 42 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 44: Cloud Server Setting

    The default Gateway address is 0.0.0.0. Can be modified according to the network Gateway availability. Cloud Server Setting Tap Cloud Server Setting on the Comm. Settings interface to connect with the ADMS server. P a g e | 43 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 45: Wiegand Setup

    To set the Wiegand input and output parameters. Tap Wiegand Setup on the Comm. Settings interface to set the Wiegand input and output parameters. 7.6.1 Wiegand input P a g e | 44 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 46 The 2 to 17 bits are the device codes. The 18 to 33 bits are the card numbers, and the 34 to 35 bits are the manufacturer codes. P a g e | 45 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 47 “C“ denotes the card number; “E” denotes the even parity bit; “O” denotes the odd parity bit; “F“ denotes the facility code; “M” denotes the manufacturer code; “P” denotes the parity bit; and “S” denotes the site code. P a g e | 46 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 48: Wiegand Output

    Pulse Interval(us) The time interval between pulses. ID Type Select the ID types as either User ID or card number. P a g e | 47 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 49: System Settings

    ★ Tap Daylight Saving Time to enable or disable the function. If enabled, tap Daylight Saving Mode to select a daylight-saving mode and then tap Daylight Saving Setup to set the switch P a g e | 48 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 50: Access Logs Setting

    2020. After restoring the factory settings, the time of the equipment will remain 18:30 on January 1, 2020. Access Logs Setting Click Access Logs Setting on the System interface. P a g e | 49 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 51 The time length of the message of successful verification displays. Delay(s) Valid value: 1~9 seconds. Face comparison To set the facial template matching time interval as required. Interval (s) Valid value: 0~9 seconds. P a g e | 50 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 52: Face Parameters

    SpeedFace-V5L [TI] User Manual Face Parameters Tap Face on the System interface to go to the face parameter settings. Recommended Matching Thresholds High Medium Medium High P a g e | 51 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 53 Therefore, adjusting this parameter can adjust the furthest comparison distance of faces. When the value is 0, the face comparison distance is not limited. P a g e | 52 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 54 • Keep one arm distance between the device and the face, and recommended not to move the face in wide range. P a g e | 53 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 55: Fingerprint Parameters

    “Low“. Users might forget the registered fingerprint or press the finger 1:1 Retry Times improperly. 1:1 Verification allows to set the retry authentication attempts for the users P a g e | 54 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 56: Palm Parameters

    Under 1:N Verification Method, only when the similarity between Palm 1:N Matching Threshold the verifying palm and all registered palm is greater than this value can the verification succeed. P a g e | 55 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 57: Factory Reset

    (This function does not clear registered user data). Tap Reset on the System interface and then tap OK to restore the default factory settings. P a g e | 56 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 58: Detection Management

    When disabled, access is granted to the user if his/her identity is verified, regardless of his/her body temperature. P a g e | 57 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 59 Users may disable the function or set a value between 1 to 255. Choose whether to update the thermal imaging temperature detection Firmware update module software version. P a g e | 58 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 60: Personalize Settings

    Menu Screen automatically go back to the initial interface. Timeout (s) The function either can be disabled or set the required value between 60 and 99999 seconds. P a g e | 59 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 61: Voice Settings

    Main Screen Style The main screen style can be selected according to the user preference. Voice Settings Tap Voice on the Personalize interface to configure the voice settings. P a g e | 60 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 62: Bell Schedules

    Tap Bell Schedules on the Personalize interface to configure the Bell settings. New Bell Schedule Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule. P a g e | 61 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 63: Punch States Options

    On the All Bell Schedules interface, tap the required bell schedule, and tap Delete, and then tap Yes to delete the selected bell. Punch States Options Tap Punch States Options on the Personalize interface to configure the punch state settings. P a g e | 62 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 64: Shortcut Key Mappings

    So, on the main interface, when the shortcut keys are pressed, the corresponding attendance status or the function interface will be displayed directly. Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys. P a g e | 63 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 65 If the Shortcut key is set as a punch state key (such as check in, check out, etc.), then it is required to set the punch state value (valid value 0~250), name and switch time. P a g e | 64 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 66 Once the Switch cycle is selected, set the switch time for each day and tap OK to confirm, as shown in the image below. Note: When the function is set to Undefined, the device will not enable the punch state key. P a g e | 65 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 67: Data Management

    On the Main Menu, tap Data Mgt. to delete the relevant data in the device. 10.1 Delete Data Tap Delete Data on the Data Mgt. interface to delete the required data. P a g e | 66 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 68 Selecting Delete by Time Range, you need to set a specific time range to delete all data within a specific period. Set the time range and click OK. Select Delete by Time Range. P a g e | 67 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 69: Access Control

    In default settings, new users are allocated into the first group with the default group time zone, where the access combo is “1“ and is set in unlock state by default. P a g e | 68 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 70: Access Control Options

    If the door is not locked and is being left open for a certain duration (Door Sensor Door Sensor Delay (s) Delay), an alarm will be triggered. The valid value of Door Sensor Delay ranges from 1 to 255 seconds. P a g e | 69 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 71: Time Schedule

    Each Time Period represents 10 Time Zones, i.e. 1 week and 3 holidays, and each time zone is a standard 24 hour period per day and the user can only verify within the valid time period. P a g e | 70 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 72 On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday etc.) to set the time. Specify the start and the end time, and then tap OK. P a g e | 71 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 73: Holidays

    Tap Holidays on the Access Control interface to set the Holiday access. P a g e | 72 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 74: Combined Verification

    N ≤ 5, and the number of members N may all belong to one access group or may belong to five different access groups. Tap Combined Verification on the Access Control interface to configure the combined verification setting. P a g e | 73 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 75 AC group 5, and the third person is from AC group 8. Delete a door-unlocking combination Set all Door-unlock combinations to 0 if you want to delete door-unlock combinations. P a g e | 74 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 76: Anti-Passback Setup

    In/Out Anti-passback: After a user checks in/out, only if the last record is a check-out record, the user can check-in again; or if it is a check-in record, the user can check-out again; otherwise, the alarm will be triggered. P a g e | 75 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 77: Duress Options

    1 to 999 seconds. Set the 6-digit duress password. When the user enters this duress password for Duress Password verification, an alarm signal is be generated. P a g e | 76 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 78: Attendance Search

    The process of searching for attendance and blocklist photos is similar to that of searching for access records. The following is an example of searching for access records. On the Attendance Search interface, tap Access Record to search for the required record. P a g e | 77 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 79 3. Once the record search succeeds. Tap the 4. The below figure shows the details of the record in highlighted in green to view its details. selected record. P a g e | 78 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 80: Autotest

    To test the RTC. The device tests whether the clock works normally and Test Clock RTC accurately with a stopwatch. Tap the screen to start counting and press it again to stop counting. P a g e | 79 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 81: System Information

    Displays the device's name, serial number, MAC address, palm, fingerprint and face Device Info algorithm, version information, platform information, and manufacturer and manufacture date. Firmware Info Displays the firmware version and other version information of the device. P a g e | 80 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 82: Connect To Zkbioaccess Mtd Software

    In the main menu, click COMM. > Cloud Server Setting to set the server address and server port. Server address: Set the IP address as of ZKBioAccess MTD server. Server port: Set the server port as of ZKBioAccess MTD (The default is 8088). P a g e | 81 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 83: Add Device On The Software

    Click [Add] in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click [OK] to add the device. P a g e | 82 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 84: Add Personnel On The Software

    Fill in all the required fields and click [OK] to register a new user. Click Access > Device > Device Control > Synchronize All Data to Devices to synchronize all the data to the device including the new users. P a g e | 83 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 85: Real-Time Monitoring On The Zkbioaccess Mtd Software

    Also, detailed information of the personnel can be seen on the right by clicking on the particular category on the pie-chart. NOTE: For other specific operations, please refer to ZKBioAccess MTD User Manual. P a g e | 84 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 86: Requirements Of Live Collection And Registration Of Visible Light Face Images

    Do not include more than one face in the capturing area. 10） A distance of 50cm to 80cm is recommended for capturing the image. (the distance is adjustable, subject to body height). P a g e | 85 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 87: Requirements For Visible Light Digital Face Image Data

    The captured person should be clearly visible, natural in color, no harsh shadow or light spot or reflection in face or background. The contrast and lightness level should be appropriate. P a g e | 86 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

  • Page 88: Statement On The Right To Privacy

    Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold.

  • Page 89: Eco-Friendly Operation

    The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 88 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 90 ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.

Table of Contents