Advertisement
Quick Links
Advertisement
Related Manuals for ZKTeco VF Series
Summary of Contents for ZKTeco VF Series
- Page 1 VF Series Version: 1.0 QUICK START GUIDE Date: March, 2018 VF Series Version: 1.0 Date: March, 2018...
- Page 2 VF Series Quick Start Guide Version: 1.0 1. Overview Take VF300/380 as an example: Front view Indicator Touch Screen Camera & Card Read Area Left side view USB Port Reset Button...
- Page 3 Rear view TCP/IP Power Tamper Alarm Switch Speaker Lock Button Sensor Aux-in +12V Out Alarm...
-
Page 4: Installation Environment
2. Installation Environment Recommended location: The device can be installed in indoor and outdoor places. Direct sunlight shall be avoided if the device is installed in outdoor places. Install the device indoors at least 10 feet (3m) away from windows, and 6.5 feet (2m) away from light fixtures. - Page 5 ① ② ③ ④ Step2: Align the wall mounted base to the holes on the wall, and use three screws to fix it onto the wall (figure①); align the iron board to the holes on the wall mounted base, and use four screws to fix it onto the wall mounted base (figure②);...
- Page 6 Different posture Different height Too close Too far Enrollment and verification: During the enrollment, follow the voice prompts by focusing eyes inside the green box. The user needs to move the face up or down during face registration. The pose for registration is shown in the figure above.
-
Page 7: Troubleshooting
5. Troubleshooting The face cannot be recognized by the device in verification. Solutions: Check if your facial expression, standing posture and distance during verification are the same with that in enrollment. Check if the device is under direct sunlight or near the windows. ...