Connecting The Ac Adapter - Star Micronics TSP043E Series Hardware Manual

3-3. Connecting the AC Adapter

Note: Before connecting or disconnecting the AC adapter, make sure that the printer and all the devices connected to it
are turned off.
Then remove the power cord from the outlet.
1) Connect the AC adapter to the power cord.
Note: We recommend that you use the standard AC adapter and power cord.
If you are not using the optional AC adapter (PS60A-24 series) and are instead preparing your own power
supply, note the following points.
• Use a power supply that is 24 VDC ± 10% and 2.1 A or more.
(Select a power supply with current capacity that is appropriate for the actual printing ratio.)
• Use a power supply that supports with SELV output.
• Take into consideration the noise in the environment that the printer is installed in, and take appropriate
measures to protect the printer from static electricity, AC line noise, etc.
2) Connect the AC adapter to the connector on the printer.
3) Insert the power cable plug into an AC outlet.
CAUTION
When disconnecting the cable, take hold of the cable
connector to pull it out. Releasing the lock makes it
easy to disconnect the connector.
Pulling the cable excessively could cause damage to
the connector.
- 9 -