Grizzly T33306 Owner's Manual page 25

Sanding Operations
Symptom
Machine slows or
stops when operat-
ing.
Deep sanding
grooves or scars in
workpiece.
Glazed sanding
surface.
Abrasive rubs off
sanding disc easily.
Model T33306 (Mfd. Since 11/22)
Possible Cause
1. Sanding pressure too
aggressive.
2. Speed setting too low.
1. Sanding disc too coarse
for desired finish.
2. Sanding pressure too
aggressive.
3. Sanding disc held still
against workpiece.
1. Sanding wet stock.
2. Sanding stock with high
amount of residue.
1. Sanding disc has been
stored in an incorrect
environment.
2. Sanding disc has been
folded or crushed.
Solution
1. Reduce sanding
(Page 16).
2. Increase speed (Page 7).
1. Use a finer grit sanding disc
(Page 15).
2. Reduce sanding
(Page 16).
3. Move sanding disc back and
forth across workpiece surface
(Page 16).
1. Only sand dry stock.
2. Use different stock, or accept
characteristics of stock and plan
to clean/replace sanding disc
frequently.
1. Replace; store sanding disc away
from extremely dry, hot, or damp
conditions.
2. Store sanding disc flat; do not bend
or fold.
pressure
pressure
-23
-