Grizzly T33306 Owner's Manual page 11

The following is a list of items shipped
with your tool. Before beginning setup, lay
these items out and inventory them.
If any non-proprietary parts are missing
(e.g. a nut or a washer), we will gladly
replace them; or for the sake of expedi-
ency, replacements can be obtained at
your local hardware store.
A
J
Model T33306 (Mfd. Since 11/22)
Inventory
I
Figure 4. Model T33306 inventory.
If you cannot find an item on this
list, carefully check around/inside
the tool and packaging materials.
Often, these items get lost in pack-
aging materials while unpacking or
they are pre-installed at the factory.
Box (Figure 4)
A. 7" 3-Speed Rotary Sander/Polisher ...1
B. D-Handle ............................................1
C. Hex Wrench 8mm ..............................1
D. Flat Washers 8mm .............................2
E. Cap Screws M8-1.25 x 25 .................2
F. Sanding Disc 40-Grit ..........................1
G. Sanding Disc 60-Grit ..........................1
H. Microfiber Pad ....................................1
I. Sanding Disc 120-Grit ........................1
J. Wool Bonnet ......................................1
D
E
H
Qty
B
C
F
G
-9
-