Sd Card Slot; Buttons; Connectors - Axis P5676-LE User Manual

AXIS P5676-LE PTZ Camera
Specifications

SD card slot

NOTICE NO NO TICE TICE
• Risk of damage to SD card. Don't use sharp tools, metal objects, or excessive force when inserting or removing the SD card.
Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the device's web interface before removing it.
Don't remove the SD card while the product is running.
This device supports SD/SDHC/SDXC cards.
For SD card recommendations, see axis.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 69.
• Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.
Power button
• Press and hold the power button to temporarily power the product when the dome cover is removed.
• The power button is also used with the control button to reset the camera to factory default settings. See page 69.

Connectors

Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
RJ45 with High Power over Ethernet (High PoE).
Multiconnector
Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a separately sold Axis Multicable C I/O Audio Power 1 m/ 5 m or a separately sold Axis 10-pin
Push-pull System Connector is required in order to maintain the product's IP rating. For more information, see Multicable connectors
on page 65 and Axis 10-pin push-pull system connector (sold separately) on page 66.
64